Description
Overview
The ignition test is the most common method for determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) and gradation. The ignition method, allows for the asphalt binder in an HMA sample to be burned off in an oven at temperatures above the flame point of the binder. Asphalt binder content is then calculated by subtracting the mass of the aggregate remaining after the asphalt binder is burned off from the initial mass of the test sample. The Asphalt Binder Analyzer integral microprocessor controlled weighing and calculation system is configurable to allow variations to standard asphalt binder test method. This apparatus combines a sophisticated furnace and weighing system to continuously measure weight loss during combustion, then automatically calculate binder content at the end of the test. Equipped with suitable safety systems to ensure that the furnace door is kept shut during the.
Model NL 2002 X / 002. Key figures: Weight Detection Accuracy ± 0.1g; Temperature Control Setting Range 100; Temperature Detection Resolution 1.0; Temperature Control Accuracy ± 5.
For laboratories in Nigeria
In Nigeria, this equipment is used for testing to SON (Nigerian Industrial Standards) and the BS methods used in the FMW General Specifications. The relevant local reference is BS EN 12697. Manufactured by NL Scientific in Malaysia and exported to Nigeria, with calibration available from our ISO/IEC 17025 accredited laboratory. Contact us for a quotation.
Applications & Test Methods
Asphalt Binder Analyzer (Ignition Method) is used for bitumen binder and asphalt mix design testing for road construction. It supports test procedures to BS EN 12697-39, ASTM D6307-10, AASHTO T308-10. Read the method guide: Asphalt Binder Extraction Test (ASTM D2172). Browse all Bitumen & Asphalt testing equipment.
Supplied With
- Sample Basket Tray Set (Top Cover,
- Upper Basket, Lower Basket and
- Base Tray)
- Extraction Fork
- Extendable Ducting Hose (1 Meter)
- Face Shield
- Heat Resistance Glove
- Fine Wire Brush (Brass)
Optional Accessories
- Storage Compartment
- Thermo Paper Roll 57mm x 31mm Dia
- Front Panel
- Example of Test Report
Technical Specifications
| Model Number | NL 2002 X / 002 |
|---|---|
| Weight Detection Accuracy | ± 0.1g |
| Temperature Control Setting Range | 100 |
| Temperature Detection Resolution | 1.0 |
| Temperature Control Accuracy | ± 5 |
| Ambient Temperature | ≤ 35 |
| Power Supply | 380 – 415V, 9.5kW Three-phase four-wire Y connection |
| Combustion Chamber Dimensions | 300 x 250 x 450 mm |
| Dimension (mm) | 850 x 650 x 1250 mm |
| Approx. Weight | 260 kg |
Compliance Standards
- BS EN 12697-39
- ASTM D6307-10
- AASHTO T308-10
Why NL Scientific
- Manufactured in Malaysia to European standards, exported to 40+ countries
- Ready stock in a large warehouse for prompt delivery
- ISO/IEC 17025 accredited calibration laboratory
- Over 3,000 products for civil engineering and material testing


Reviews
There are no reviews yet.